Documented field work
Before, rebuild and recorded result
The need
The underfloor heating cable had been cut. Access was limited, so the recorded work included removing grout to expose more of the cable and cutting a wooden stud to allow a new route for it.
PTX's approach
The repair stayed focused on the affected cable. PTX exposed the cable, created the new route, joined the wires with crimp connectors and taped the connectors in two layers of electrical tape. The heating was then tested.
The recorded result
The work record confirms that the cut underfloor heating cable was repaired and that the heating was tested afterward. No additional result is claimed beyond that recorded testing.
What this job helps another property owner consider
If underfloor heating stops working after a cable is damaged, the repair may involve more than reconnecting wires at the visible point. This Vancouver job required access through grout and a route through a wooden stud before the wires could be joined and the heating tested. Each property needs its own assessment.
Frequently asked questions
Questions property decision-makers ask
What did this Vancouver electrical service call involve?
The recorded work involved a cut underfloor heating cable. PTX removed grout to expose more cable, cut a wooden stud to allow a new route, joined the wires with crimp connectors, applied two layers of electrical tape over the connectors and tested the heating.