Documented field work
Installation details and completed work
The need
The site needed two existing forklift chargers replaced with new forklift chargers. The documented work focused on disconnecting the two power cords from the old chargers and connecting them to the new equipment.
PTX's approach
PTX disconnected both power cords from the old forklift chargers and installed them on the new forklift chargers. The new chargers were then tested with a Motive Energy representative to check that they were working properly.
The recorded result
The two new forklift chargers were installed and tested with the Motive Energy representative. This electrical service call was completed on August 27, 2026.
What this job helps another property owner consider
When replacing powered equipment, plan for both the electrical connection and a coordinated check with the equipment specialist. In this case, testing was carried out with a Motive Energy representative after the two power cords were installed on the new forklift chargers.
Frequently asked questions
Questions property decision-makers ask
What did PTX do during this forklift charger installation?
PTX disconnected two power cords from the old forklift chargers, installed them on the new forklift chargers and tested the new chargers with a Motive Energy representative.