Documented field work
Installation details and completed work
The need
The garburator switch would not stay off. According to the service record, it would spring back to the on position when released or when the tape was removed. The recorded repair involved a broken toggle switch.
PTX's approach
The broken toggle switch was disconnected and removed. PTX installed one new 15A Decora switch and one new Decora nylon cover plate, then tested the switch. The work stayed focused on the documented switch problem rather than adding unrelated work.
The recorded result
The service record states that the switch was tested and was working properly after installation. The work was completed in Maple Ridge on September 28, 2026.
What this job helps another property owner consider
If a switch does not remain in the position selected, the issue is worth describing clearly when arranging an Electrical service calls visit. This example involved a garburator switch that returned to the on position, and the recorded work was replacement of the broken toggle switch, cover plate installation and testing. It is an example of one completed repair, not a diagnosis of another property.
Frequently asked questions
Questions property decision-makers ask
What was replaced during this Maple Ridge service call?
The recorded work lists one broken toggle switch disconnected and removed, one new 15A Decora switch installed and one new Decora nylon cover plate installed. The switch was then tested and recorded as working properly.