Documented field work
Installation details and completed work
The need
A commercial building in Burnaby needed a 20A outlet installed in an existing wired electrical box. The customer was supplying the 20A receptacle and cover plate. Because the work was taking place in a clean room, access preparation was also part of the service visit.
PTX's approach
The breaker was turned off before work began. The technician got suited up and disinfected tools before entering the clean room. The existing blank cover was removed, followed by installation of the customer-supplied 20A receptacle and cover plate. Someone on site then turned the breaker back on.
The recorded result
The receptacle was tested after the breaker was restored and was recorded as working properly. The job record identifies the service as an electrical service call completed in Burnaby on October 24, 2026.
What this job helps another property owner consider
For a commercial outlet installation, it is worth confirming the existing box and circuit arrangement, identifying who will supply the receptacle and cover plate, and planning access requirements before the visit. In this case, the existing box was described as wired for a 20A single-phase connection, and clean-room preparation was required before the installation.
Frequently asked questions
Questions property decision-makers ask
What was installed during this Burnaby electrical service call?
PTX installed a customer-supplied 20A receptacle and cover plate in an existing wired electrical box in a commercial building. The receptacle was tested after the breaker was restored and was recorded as working properly.